Overview
A high quality, high obliterating vinyl matt ideal for use on interior walls and ceilings. Also designed to infill block and brickwork to give a smooth surface where the cost of rendering and plastering is not required. This sprayable, fast-drying paint only requires two coats making it ideal for large areas in warehouses, stockrooms, and factories.
- Ideal for trade and large applications
- One coat system
- Infills block and brickwork
- Sprayable
| Area | Interior |
| Recommended Use | Interior walls and ceilings including brick and blockwork |
| Base | Water-Based |
| Coverage | 10-12m² per litre |
| Drying Time | Touch dry in 2-4 hours |
| Re-Coat Time | 4 Hours |
| Recommended Coats | 2-3 Coats |
| Application Method | Brush, roller or sprayer |
| VOC Levels | Low |
| Clean Up | Clean up immediately after use with warm soapy water. Remove as much product as possible prior to cleaning. |
Preparation
For the best results always thoroughly prepare the surface. Ensure the surfaces to be painted are clean dry and free from dust, dirt, grease and wax.
- On previously painted and glossy surfaces remove all loose or flaking paint and rub down with an abrasive paper.
- Areas affected by mould should be treated with a suitable .
- New plaster and cement should be allowed to dry thoroughly before application.
- Block any staining with .
Application
We always recommend testing a small inconspicuous area to ensure you are happy with the finished results.
- Stir well and only apply when temperatures are above 8°C.
- Apply by brush, roller, conventional H.V.L.P or airless spray, do not over spread.
- On unpainted cement, render, plaster, brickwork or any porous substrate the first coat should be thinned with 20-30% clean water.
- Spraying will considerably reduce the coverage rate depending on the type of spray equipment used.
- Apply two to three coats, allowing each coat to dry for four hours before applying the next.
