Overview
Johnstone's Trade Aqua Guard Undercoat Primer is a water-based undercoat crafted for interior wood and metal surfaces. Featuring all the benefits of a traditional undercoat, but is quick drying to reduce application times. Designed for use under the , or for the best results. While also being suitable for use with other water-based paints.
- Quick Drying
- Easy Application
- Suitable for interior and exterior wood and metal surfaces
- Low odour & VOC
| Area | Interior |
| Recommended Use | Wood and metal: including iron/steel, planed timber, softwood, timber, window frames |
| Base | Water-Based |
| Coverage | Up to 13m2 per litre |
| Drying Time | Touch dry in 1-2 hours |
| Re-Coat Time | 4-6 Hours |
| Application Method | Brush, Roller, Conventional Spray |
| VOC Levels | Low |
| Clean Up | Remove as much product as possible from the equipment before cleaning following manufacturer's recommendations |
Preparation
Ensure the surface is clean, dry and free from dirt and grease.
- Remove any loose or flaking material
- Rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly
Application
All surfaces to be painted should be clean, dry and free from loose and flaking material. Prime bare wood surfaces with . Rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly. Avoid the inhalation of dust.
Ensure good ventilation during application and drying. Stir well before use. Easy to apply by brush, roller, and spray. Avoid overspreading. Do not apply in temperatures below 8°C or externally when rain is imminent. For best results use a synthetic brush.
Note: Wear a suitable face mask if dry sanding. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
Always follow manufacturer's instructions found on the tin
">
