Overview
Johnstone's Trade Aqua Water Based Satin is a water-based, hardwearing finish designed for wood and metal, on both interior and exterior applications. A great alternative to a traditional satin finish, this innovative formulation is quicker drying and has a low odour. Tough and durable, Aqua Water Based Satin gives optimal results and enhances the longevity of your finish when used over .
- Water-based formulation delivering traditional satin finish
- Low odour
- Perfect to use over
- Ideal for interior and exterior application
| Area | Interior & Exterior |
| Recommended Use | Wood and metal: including iron/steel, planed timber, softwood, timber, window frames |
| Base | Water-Based |
| Coverage | Up to 12m² per litre |
| Re-Coat Time | 4-6 Hours |
| Application Method | Brush, Roller or Sprayer |
| VOC Levels | Low |
| Clean Up | Remove as much paint as possible from the equipment before cleaning with water |
Preparation
Ensure the surface is clean, dry and free from dirt and grease.
- Remove any loose or flaking material
- Rub down previously painted surfaces with fine waterproof abrasive paper and rinse thoroughly
- Prime bare wood surfaces with
- Prime all other bare surfaces with the appropriate Johnstone's Trade primer
- Apply one full coat of to all correctly prepared and primed surfaces before application of Johnstone's Trade Aqua Satin
Application
Always test a small area of the surface to be painted to ensure you are happy with the finished results
- Stir thoroughly before use to ensure the paint is completely mixed
- Johnstone's Trade Aqua Water Based Satin can be applied by brush, roller or spray
- For best results use a synthetic brush
- Avoid overspreading
- Ensure good ventilation during application and drying
Always follow manufacturer's instructions found on the tin
Aftercare & Storage
Store the paint in dry conditions and protect from extremes of temperature.
After use firmly secure the lid and store in a secure upright position.
